BIO-THERAPEUTIC
 |  |  |  |
|---|
quick start guide
NOTE: True Microcurrent is computer calibrated 1,024 times every second to deliver optimum performance to the skin, and to harmonize with the body’s own electrical signature. Within this zone, there will be little to no sensation on the skin.
Step 1
• Begin with freshly cleansed and exfoliated skin.
• Refer to the instruction guide for a complete list of contraindications. Do not use if any contraindication is present.
Step 2
• Apply Restyfluid to the entire face
• Set the bt-sculpt to LIFT mode, Power Setting 1-5, as appropriate. It is recommended to begin on power level 1, and increase based on sensitivity.
• Apply lifting techniques to all areas of the face
• All movements should be held for 12 seconds.
General movement technique
1. Place lower probes in contact with the skin at a 90 degree angle with firm pressure
2. Move in an upward movement until you have reached full extension and feel the K4iTEK tension mechanism stop
3. While holding the lower probes stationary, place the top probes in contact with the skin
4. Allow the K4iTEK tension mechanism to lift the skin keeping firm lifting tension. Hold for 12 seconds.
5. Alternative Technique
Some individuals prefer to use the probes in a stationary position and not engage the K4iTEK tension mechanism. With this technique use smooth upward lifting movement and hold the skin taut for the full 12 seconds without engaging the tension mechanism.
Application Instructions
• Apply techniques to both sides of the face.
• Use with the K4iTEK tension mechanism or without, depending on personal preference.
• Apply Aquafuse Hydrate for additional hydration throughout
• Repeat the technique for steps 1, 2, and 5 to cover the entire jawline, cheek, and brow area.
Lift Step 1
Lower Probes: Under jaw line
Upper Probes: Under cheekbone
Technique: Grip with lower probes placed under jaw line and angle upward, gripping the area and holding it with upper probes just under cheek bone.
Hold: 12 seconds
Lift Step 2
Lower Probes: Under the cheekbone
Upper Probes: Under the eye orbit
Technique: Grip with lower probes placed under cheek bone and angle upward, gripping the area and holding it with upper probes under the eye orbit.
Hold: 12 seconds
Lift Step 3
Lower Probes: Corner of mouth
Upper Probes: In front of ear
Technique: Grip with lower probes placed near the corner of the mouth, gripping the area and holding it with firm a upward angle with upper probes near the ear.
Hold: 12 seconds
Lift Step 4
Lower Probes: Outer corner of mouth
Upper Probes: Inner corner of eye
Technique: Grip with lower probes placed near the outer corner of the mouth, gripping the area and holding with a gentle upward angle, with upper probes placed near the inner corner of the eye.
Hold: 12 seconds
Lift Step 5
Lower Probes: Under the eyebrow
Upper Probes: Above the eyebrow
Technique: Grip with lower probes placed below the brow, gripping the area and holding with a gentle upward angle, with upper probes on the forehead near the hairline.
Hold: 12 seconds
Step 3
• Apply bt-cocktail ampoule to the entire face
• Set the bt-sculpt to SKIN mode
• Move probes gently across the face, in a back and forth (1) or circling movement (2), covering the entire area. Please note that both upper and lower probes should stay in contact with the skin at all times.
Step 4
• Follow with moisturizer and sunscreen of choice.
meet the bt-sculpt
From microcurrent pioneer Bio-Therapeutic comes a revolutionary new facial sculpting technology that delivers the ultimate in skin fitness, with professional grade lifting and firming in the convenience of a rechargeable, handheld unit.
using the bt-sculpt at home
The bt-sculpt's revolutionary design brings incredible facial toning and lifting to the home regimen, and is easy to use single-handed.
Wondering how it works? Check out this video to learn how to use the bt-sculpt at home.
frequently asked questions
What sensation should I expect?
True Microcurrent is computer calibrated 1,024 times every second to deliver optimum performance to the skin, and to harmonize with the body’s own electrical signature. Within this zone, there will be little to no sensation on the skin. Our technology is specifically calibrated so that it does not overload the facial musculature, which can lead to drooping and accelerated skin aging signs over time.
When should I expect to see results?
Depending on your facial landscape, most people start to see a lifted appearance after just one service, and results are cumulative over time.
How many times per week should I use the bt-sculpt?
We recommend using the LIFT mode with facial sculpting three times a week. The bt-sculpt is safe to use more frequently, but we have found optimum results with 3x weekly use.
SKIN mode can be used daily if desired, as it helps to energize the skin and optimize performance of your favorite serums and leave on formulas.
How long does the bt-sculpt’s charge last? How long does it take to charge?
The bt-sculpt will usually fully charge within 2 hours, and a charge will last 3 hours of run time, or 18 intervals of 10 minutes.
K4iTEK self-tensioning probes
The patent pending K4iTEK® technology of the bt-sculpt self tensioning probe system usher in a new era of results by delivering the optimum level of facial lifting with just one hand. The lower probes feature a unique spring system that provides just the right amount of assisted lift for an anatomically optimized service.
the world's only
true microcurrent
True Microcurrent represents the gold standard in microcurrent facial lifting by ensuring that the amount of current introduced to the skin is always in the optimal, efficacious output zone and that the frequency shape is optimized for the desired result.
Suzuki Sequencing features a specific, clean waveshape that’s computer calibrated over 1,024 times every second.
the industry leader
Bio-Therapeutic is an FDA registered, ISO 9001 / ISO 13485 Medical Device Manufacturer headquartered in Seattle, Washington. We've pioneered the use of technology accelerated skin care in the professional industry for nearly 50 years.
Born in the USA
All of our technology is designed, engineered and quality tested in Seattle, WA.
The Skin Therapist's Choice
Bio-Therapeutic is the technology choice for professional skin therapists in more than 35 countries.
The Microcurrent Pioneers
Bio-Therapeutic pioneered the use of microcurrent for facial toning and lifting.
features & specifications
• Revolutionary, patent pending K4iTEK self tensioning probe system allows for comfortable one handed application, while providing
optimum lifting pressure.
• Two preset facial programs eliminate guesswork for exceptional results every time.
• True microcurrent with Suzuki Sequencing optimizes wave shape, output levels and frequency on each energy pathway for
precise, targeted results without the risk of fatiguing the skin or causing laxity.
• Features the same dual channel/four energy pathway approach as our award winning, professional microcurrent technologies,
creating interferential canvassing for superior coverage and enhanced energization of the skin.
Weight: 298.5g (10.53 oz)
Dimensions: 175mm (6.9”) L x 53mm (2”) W x 55mm (2.2”) H
2 Modes: LIFT, SKIN
Power Levels: 5
Body Material: ABS / Zinc Alloy / PU coating
Water Resistant: IP25
Power: Rechargeable 3.7 V, 320 mAh
Bespoke design and technology by Bio-Therapeutic
included
bt-sculpt
Operation Manual
Quick Start Guide
A/C Power Adapter
Magnetic USB contact charger
Equipment Stand
Pink silicone carrying case
One Year Limited Warranty
The bt-sculpt is intended to stimulate the face. The device is for over the counter cosmetic use. The bt-sculpt is not intended in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease. Items may vary without notice and are not available in all countries.
© Micro Current Technology, Inc. All rights reserved. Patent Pending.
Bio-Therapeutic
2244 1st Ave S.
Seattle, WA 98134
USA