top of page
BG.jpg
IMG1
IMG2
IMG3
IMG4
QSG

quick start guide

NOTE: True Microcurrent is computer calibrated 1,024 times every second to deliver optimum performance to the skin, and to harmonize with the body’s own electrical signature.  Within this zone, there will be little to no sensation on the skin.

Step 1

• Begin with freshly cleansed and exfoliated skin.

• Refer to the instruction guide for a complete list of contraindications. Do not use if any contraindication is present. 

Step 2

• Apply Restyfluid to the entire face

• Set the bt-sculpt to LIFT mode, Power Setting 1-5, as appropriate. It is recommended to begin on power level 1, and increase based on sensitivity.

• Apply lifting techniques to all areas of the face

• All movements should be held for 12 seconds. 

General movement technique

1. Place lower probes in contact with the skin at a 90 degree angle with firm pressure

GM1.jpg

2. Move in an upward movement until you have reached full extension and feel the K4iTEK tension mechanism stop 

GM2.jpg

3. While holding the lower probes stationary, place the top probes in contact with the skin 

GM3.jpg

4. Allow the K4iTEK tension mechanism to lift the skin keeping firm lifting tension. Hold for 12 seconds.

GM4.jpg

5. Alternative Technique 

Some individuals prefer to use the probes in a stationary position and not engage the K4iTEK tension mechanism. With this technique use smooth upward lifting movement and hold the skin taut for the full 12 seconds without engaging the tension mechanism.

GM5.jpg

Application Instructions

 

• Apply techniques to both sides of the face.

• Use with the K4iTEK tension mechanism or without, depending on personal preference.

• Apply Aquafuse Hydrate for additional hydration throughout 

• Repeat the technique for steps 1, 2, and 5 to cover the entire jawline, cheek, and brow area.

Lift Step 1

Lower Probes: Under jaw line

Upper Probes: Under cheekbone

Technique: Grip with lower probes placed under jaw line and angle upward, gripping the area and holding it with upper probes just under cheek bone.

Hold: 12 seconds

Lift Step 2

Lower Probes: Under the cheekbone

Upper Probes: Under the eye orbit 

Technique: Grip with lower probes placed under cheek bone and angle upward, gripping the area and holding it with upper probes under the eye orbit.

Hold: 12 seconds

Lift Step 3

Lower Probes: Corner of mouth

Upper Probes: In front of ear 

Technique: Grip with lower probes placed near the corner of the mouth, gripping the area and holding it with firm a upward angle with upper probes near the ear.

Hold: 12 seconds

Lift Step 4

Lower Probes: Outer corner of mouth

Upper Probes: Inner corner of eye 

Technique: Grip with lower probes placed near the outer corner of the mouth, gripping the area and holding with a gentle upward angle, with upper probes placed near the inner corner of the eye.

Hold: 12 seconds

Lift Step 5

Lower Probes: Under the eyebrow

Upper Probes: Above the eyebrow 

Technique: Grip with lower probes placed below the brow, gripping the area and holding with a gentle upward angle, with upper probes on the forehead near the hairline.

Hold: 12 seconds

Step 3

• Apply bt-cocktail ampoule to the entire face 

• Set the bt-sculpt to SKIN mode 

• Move probes gently across the face, in a back and forth (1) or circling movement (2), covering the entire area. Please note that both upper and lower probes should stay in contact with the skin at all times.

Step 4

• Follow with moisturizer and sunscreen of choice.

l1.jpg
l2.jpg
l3.jpg
l4.jpg
l5.jpg
s1.jpg

maak kennis met de
bt-sculpt

MEET

Bio-Therapeutic, pionier op het gebied van microcurrent, komt met een revolutionaire nieuwe gezichtsmodelleringstechnologie die de ultieme huidfitness levert, met professionele lifting en versteviging in het gemak van een oplaadbare, draagbare unit.

thuis de bt-sculpt gebruiken

HOME

Het revolutionaire ontwerp van de bt-sculpt brengt ongelooflijke gezichtsversteviging en -lifting naar het thuisregime, en is gemakkelijk met één hand te gebruiken.

Benieuwd hoe het werkt? Bekijk deze video om te leren hoe je de bt-sculpt thuis kunt gebruiken.

frequently asked questions

FAQ

What sensation should I expect?

True Microcurrent is computer calibrated 1,024 times every second to deliver optimum performance to the skin, and to harmonize with the body’s own electrical signature.  Within this zone, there will be little to no sensation on the skin.  Our technology is specifically calibrated so that it does not overload the facial musculature, which can lead to drooping and accelerated skin aging signs over time.

When should I expect to see results?

Depending on your facial landscape, most people start to see a lifted appearance after just one service, and results are cumulative over time.

How many times per week should I use the bt-sculpt?

We recommend using the LIFT mode with facial sculpting three times a week.  The bt-sculpt is safe to use more frequently, but we have found optimum results with 3x weekly use.

SKIN mode can be used daily if desired, as it helps to energize the skin and optimize performance of your favorite serums and leave on formulas.

How long does the bt-sculpt’s charge last?  How long does it take to charge?

The bt-sculpt will usually fully charge within 2 hours, and a charge will last 3 hours of run time, or 18 intervals of 10 minutes.

PEOPLE.jpg

K4iTEK zelfspannende sondes

De K4iTEK technologie (patent in aanvraag) van het bt-sculpt zelfspannende sondesysteem luidt een nieuw tijdperk van resultaten in door met slechts één hand het optimale niveau van gezichtslifting te leveren. De onderste sondes hebben een uniek veersysteem dat precies de juiste hoeveelheid geassisteerde lift biedt voor een anatomisch geoptimaliseerde service.

's werelds enige
echte microcurrent

Echte Microcurrent vertegenwoordigt de gouden standaard in microcurrent gezichtslifting door ervoor te zorgen dat de hoeveelheid stroom die in de huid wordt gebracht altijd in de optimale, effectieve outputzone is en dat de frequentievorm is geoptimaliseerd voor het gewenste resultaat.

Suzuki Sequencing heeft een specifieke, zuivere golfvorm die meer dan 1024 keer per seconde door de computer wordt gekalibreerd

MCSS2.png

de marktleider

Bio-Therapeutic is een door de FDA geregistreerde, ISO 9001 / ISO 13485 fabrikant van medische hulpmiddelen met hoofdkantoor in Seattle, Washington.  We zijn al bijna 50 jaar een pionier in het gebruik van door technologie versterkte huidverzorging in de professionele industrie.

Geboren in de VSA

Al onze technologie is ontworpen, ontwikkeld en getest op kwaliteit in Seattle, WA.

De keuze van de huidtherapeut

Bio-Therapeutic is de technologische keuze voor professionele huidtherapeuten in meer dan 35 landen.

De microcurrent pioniers

Bio-Therapeutic was een pionier in het gebruik van microcurrent voor gezichtsversteviging en –lifting

strip.jpg

functies & specificaties

• Revolutionair K4iTEK zelfspannend sondesysteem, waarvoor patent is aangevraagd, maakt een comfortabele toepassing met één hand mogelijk, terwijl een optimale lift wordt geboden.
• Twee vooraf ingestelde gezichtsprogramma's elimineren giswerk voor telkens weer uitzonderlijke resultaten.
• Echte microcurrent met Suzuki Sequencing optimaliseert golfvorm, outputniveaus en frequentie op elk energiepad voor precieze, gerichte resultaten zonder het risico van vermoeidheid van de huid of verslapping.
• Beschikt over dezelfde benadering met twee kanalen/vier energiebanen als onze bekroonde, professionele microcurrenttechnologieën, waardoor interferentie wordt gecreëerd voor superieure dekking en verbeterde energie van de huid.

Gewicht: 288,2 g (10,16 oz)
Afmetingen: 175 mm (6,9 inch) L x 53 mm (2 inch) B x 55 mm (2,2 inch) H
2 standen: LIFT, HUID
Vermogensniveaus: 5
Lichaamsmateriaal: zinklegering
Waterbestendig: IPX5
Vermogen: Oplaadbaar 3.7V 
Op maat gemaakt ontwerp en technologie door Bio-Therapeutic

included

bt-sculpt
Handleiding
Snelstartgids
AC-voedingsadapter
Magnetische USB-contactoplader
Apparatuur standaard
Roze siliconen draagtas

Een jaar beperkte garantie

MD-edit-BT-2020-CORP-LOGOS-HV-TAGNOTAG-R

De bt-sculpt is bedoeld om het gezicht te stimuleren. Het apparaat is voor over-the-counter cosmetisch gebruik. De bt-sculpt is niet bedoeld voor het diagnosticeren van ziekten of andere aandoeningen, of voor het genezen, verlichten, behandelen of voorkomen van ziekten. Artikelen kunnen zonder voorafgaande kennisgeving variëren en zijn niet in alle landen verkrijgbaar.  
© Micro Current Technology, Inc. Alle rechten voorbehouden. Patent aangevraagd.

Biotherapeutisch
2244 1st Avenue S.
Seattle, WA 98134
VS

 

info@bio-therapeutic.com

Biotherapeutisch

©2023 door Biotherapeutisch. Met trots gemaakt met Wix.com

bottom of page